- class picazzo3.filters.ring.cell.RingRectSymmNotchFilter¶
Rectangular Ring resonator with one bus waveguide, which is placed on the South side of the ring. This type of filter is often called a ‘notch filter’ or ‘all-pass’ filter. The shape of the bus waveguide mirrors the shape of the ring, which makes the coupling section symmetric.
The ring shape is a rounded rectangle of which the bend radius can be specified, as well as the horizontal and vertical straight sections. it is also possible to specify the rounding algorithm of the bends.
The waveguide template of the ring and the couplers can be chosen independently.
- coupler_trace_templates: List with type restriction, allowed types: <class ‘ipkiss3.pcell.cell.pcell.PCell’>
list of trace_templates for the ring couplers. By default the same template as the ring is taken
- ring_trace_template: PCell and _WaveguideTemplate
Trace template for the ring waveguide
- couplers: List with type restriction, allowed types: <class ‘ipkiss3.pcell.cell.pcell.PCell’>
list of coupler PCells
- ring_segments: List with type restriction, allowed types: <class ‘ipkiss3.pcell.cell.pcell.PCell’>
list of Ring PCells
- name: String that contains only ISO/IEC 8859-1 (extended ASCII py3) or pure ASCII (py2) characters
The unique name of the pcell
- Other Parameters
- ring_trace_templates: List with type restriction, allowed types: <class ‘ipkiss3.pcell.cell.pcell.PCell’>, locked
Trace templates for the ring segments. Locked, as there is only one segment in this Ring. Use ‘ring_trace_template’ instead.
- class Layout¶
- coupler_angles: list<[0,90]>
- coupler_lengths: list<number >= 0>
straight lengths of the couplers. if None, same lengths as the ring will be used
- coupler_offsets: list<Real, number>
list of offsets of the ring couplers along the centerline
- coupler_radii: list<number >= 0>
radii of the couplers. if None, same radius as the ring will be used
rounding algorithm of the couplers. if None, same radius as the ring will be used
- coupler_spacings: list<Real, number>
list of centerline-to-centerline spacings of the ring couplers.When negative, the ring and coupler waveguide will cross, which ispossible when the ring traces template and the coupler trace templateare on different process layers (vertical couplers)
- coupler_straights: list<number >= 0>
lengths of the straigth sections at the start and end of the couplers
- straights: Coord2 and number >= 0
Parameters for the couplers. This is a list of dicts, and the length of the list should be the same as the number of couplers
- view_name: String that contains only alphanumeric characters from the ASCII set or contains _$. ASCII set is extended on PY3.
The name of the view
- shape_position: Coord2
Translation of the shape.
- area_layer_on: ( bool, bool_, bool or int )
When True, the Ring area will be covered by i3.Rectangles on all cover layers of the ring waveguide template.
list of coupler transformations
- manhattan: ( bool, bool_, bool or int )
Adds rectangular blocks in the bends to avoid as much as possible non-manhattan angles.
- angle_step: float and number > 0
Angle step for rounding.
- bend_radius: float and number > 0
Bend radius for the auto-generated bends.
Rounding algorithm used to generate the bends. Can be circular, spline, ….
- Other Parameters
- shape: locked
- shapes: locked
Shapes of the ring segments. Locked, as there is only 1 ring segment. Use ‘shape’ instead
from technologies import silicon_photonics # noqa: F401 from ipkiss3 import all as i3 from picazzo3.filters.ring import RingRectSymmNotchFilter ring = RingRectSymmNotchFilter(name="my_rectsymmnotchring") layout = ring.Layout( coupler_lengths=[1.0], coupler_radii=[3.0], straights=(i3.TECH.WG.SHORT_STRAIGHT, i3.TECH.WG.SHORT_STRAIGHT + 3.0), area_layer_on=False, manhattan=True, ) layout.visualize(annotate=True)