Installing IPKISS

System Requirements

Supported Operating Systems:

IPKISS is tested and supported on the following platforms:

  • Windows: Windows 10

  • Linux: Centos 6.6+ (newer recommended). Ubuntu and other linux distributions are not explicitely tested, but in general work fine.

Hardware Requirements:

Ram Memory:

  • Linux: 4GB+ recommended

  • Windows: 8GB+ recommended

Disk Space: 4.5GB free disk space required.

Installing IPKISS on Windows

Downloading the software

To download the latest version of the IPKISS Photonics Design Platform, sign in or request an account on the Luceda customer portal. You will find a download link in your personal account page.

Installing the software

After opening the executable installer, please follow the steps of the installation program. The installation will proceed in two steps: it first extracts all files to the installation folder, and then sets up the initial ipkiss3 environment. The installation can take up to 10-15 minutes.


The installer takes a while to start. Please be patient while the installer is working in the background. You may receive the message “Windows protected your PC”. If this happens, please click More info and then press Run anyway.


Please don’t click inside the terminal while it is installing. This would cause the installation to pause due to how the Windows Terminal works. If the windows terminal does get paused in this way, press any key to resume the installation.

After the installation, you can choose to launch Luceda Control Center. Alternatively, you can find the control center in your start menu, as shown below:

Final step of the installer.

In the final step of the installer, you can choose to start Luceda Control Center.


You can also start the Luceda Control Center from the start menu.

License types

There are two types of licenses: node-locked and floating licenses.

  • Node-locked license: this type of license is tied to a specific computer. This means that it cannot be used on other computers. The license is fully described by the license file which needs to be installed on the computer to which it is locked. A node-locked license is locked to a host id, which is the serial number of a hardware part of the computer (disk or network card).

  • Floating license: in this case, there is no restriction on which computer you can run the software, but you are limited to a certain number of licenses. Floating licenses are hosted through a license server and hence requires some setup, which may require the assistance of your computer or network administrator. Every computer on which you want to use the software needs a license file installed, which will inquire this license server. To set up this type of license, please refer to setting up the reprise license server.

Obtaining and installing a license

A license file can be obtained through Luceda. Please email if you would like to purchase a license. Licenses can be of two types and require the following information:

  • For node-locked licenses, we will need the MAC address of the network card of the machine that will run the software.

  • For floating licenses, we require the MAC address of the network card of the license server as well as whether or not it is a virtual machine. Please refer to setting up the reprise license server.

During the process of obtaining a license from Luceda, you will be asked for the above information. Once you have provided the above information, we will send you the license.

Obtaining the MAC address is differs slightly between Windows and Linux.

On Windows, open a command prompt and type ‘ipconfig /all’. Then, scroll down until you see the heading ‘Ethernet adapter Ethernet’. Next to ‘Physical Address’, you will find the MAC address corresponding to your Ethernet port, which is a physical port and so of the type we want.

On Linux, open a terminal and type ‘ip addr show’. You will find a list of ports together with their MAC addresses. Please use the MAC address of a physical interface (such as an Ethernet port).

Once you have obtained the license file, please follow the following instructions to install it. Open the Luceda Control Center and click ‘Product License’. Then click ‘Add License’ and navigate to the license you want to add. This will copy your license file to C:\luceda\ipkiss_xyz\python\envs\ipkiss3, which allows IPKISS to discover your license. If this doesn’t work, you can copy-paste the file to that folder manually.

In case you’re using a license server, you’ll first have to make sure that the first line in the license file contains the URL to the server that hosts the license. For example, the first line of the license may look like this:

HOST 1021486dc38f 5053

It means:

  • HOST: indicates the license server information.

  • the location to the server. You have to modify this so it points to the correct server.

  • 1021486dc38f: the hostid of the server. This should already be set up properly and should not be modified.

  • 5053: the port to connect to (5053 is the default port and typically doesn’t need to be modified).

Luceda Control Center

Luceda Control Center is the central location to manage your installation, consult documentation and samples, and so on. It can be launched after installing the software, or by selecting the application from the start menu as explained in the previous step (currently, Luceda Control Center only works on Windows). Below we show the different options offered by Luceda Control Center:

Image of the Luceda Control Center.

Luceda Control Center is the main application window, from which you can manage your installation and get direct access to the documentation and samples.

The Start tab contains starting points for the following categories:

  • Software

    • “IPKISS terminal”: This start a terminal with the IPKISS environment preconfigured. From this terminal, you can perform a set of tasks, such as installing additional packages, starting Python notebooks, etc.

    • “Code Editor”: This start PyCharm. It opens the last project you were working on. If you haven’t started it before, it will ask to create a new project.

    • “Mentor L-Edit”: This starts L-Edit preconfigured for IPKISS usage.

  • Documentation, training and support

    • “Luceda documentation”: This opens an off-line copy of our documentation. Alternatively, you can visit the on-line documentation.

    • “Luceda Academy”: This opens an online training hub, where you can find the necessary resources to get started with IPKISS and improve your designing skills using the Luceda ecosystem.

    • “Samples in L-Edit”: This opens the IPKISS Link for Siemens EDA samples that are run from L-Edit.

    • “Customer support”: This opens a web browser to our online support channel.

      Alternatively, you can e-mail, which will automatically create an account for you if you don’t have one yet.

The User license tab contains the Luceda Photonics license. Contact us tab contains general information about Luceda Photonics and explains how to get support.

Installing a code editor

When using IPKISS, you will often write Python code to build new PCells, create circuits, run simulations etc. To make this efficient, it is important to use a good code editor with coding assistance, such as code completion, debugging, and so on. Having a good code editor in general can increase productivity while working with IPKISS. Below is a list of editors that have been used in the past in combination with IPKISS. Our main supported tool is PyCharm.

  • PyCharm (free/commercial licenses): The recommended editor, with code completion, debugging, etc. Please check out the set up IPKISS in PyCharm.

  • Wing IDE (commercial, also a free lightweight version): It has all the features needed to efficiently use IPKISS. It is fast and stable, and works on Linux / Mac / Windows. See guide to set up Wing IDE for IPKISS.

  • PyDev (free): It is a Python IDE for Eclipse. It has good project management, good code completion and debugging capabilities.

  • Sublime Text Editor (unregistered/registered version): It is very fast and has many advanced text editing capabilities. It takes a bit more time to set it up properly, but very extensible.

  • Spyder (free): A simple IDE written in Python and focused on the scientific community.

Installing IPKISS on Linux

Running Ipkiss on Linux is supported using Anaconda. Anaconda is a Python distribution that targets scientific users. It makes working with binary packages much easier and allows to have different independent environments next to one another. It is developed and maintained by Continuum Analytics. For more information visit their website:

This document explains how to complete a basic anaconda installation and how to install Ipkiss on it.

Installing miniconda on Linux

Miniconda is a minimal version of the Anaconda distribution, but it contains all the elements to install and run IPKISS. If you have already installed anaconda or miniconda you can skip this part and reuse your existing installation.

1 ) Download the 64 bit version of the python2.7 version of the miniconda installer, by executing the following command:

wget -O

Or you can choose to download the installer by copy/pasting the link in your browser.

2 ) Execute the miniconda installer

The miniconda installer is a simple bash script, execute it using the following command:

bash ./

We assume you have sufficient privileges to complete the installation. If this is not the case, you’ll need to contact your system administrator.

The install script will present you the following questions:

  1. Do you accept the license agreement?

  2. Which path do you want to install into? The default is $HOME/miniconda3. If you prefer, you can specify another location here.

  3. Do you wish to prepend the Miniconda install location to the PATH environmental variable?

Question 3 will make sure that you have access to all the necessary tools when you launch a terminal. If you don’t have another anaconda distribution installed, we recommend that you execute this step. When you’re already using Python on your machine, you might want to be bit more cautious, to make sure that you don’t override the old configuration.

When the install script successfully finished, you can continue with installing IPKISS.

Installing IPKISS packages

The Anaconda distribution is built around ‘environments’. When you create a new environment, you can install packages into this environment without changing other environments. This way a new version of a package can exist next to an old version. In this section we explain how to install Ipkiss and its dependencies to a dedicated environment.

First ensure that you are using an anaconda or miniconda installation. If you installed miniconda according to the instructions above, and are still in the same terminal window, then first load anaconda:

source ~/.bashrc

If you now run which python, then you should get ~/miniconda3/bin/python or similar.

Then, download the .zip package we sent you upon software deliver. Now we can start the installation of IPKISS by executing the following command:

cd ~/Downloads # We assume you downloaded the packages here.

When the command exits you should have a working Ipkiss installation. You can activate it by running the following command:

conda activate ipkiss3

If you get the following error message:

CommandNotFoundError: Your shell has not been properly configured to use 'conda activate'.
To initialize your shell, run

    $ conda init <SHELL_NAME>

Execute first conda init bash (assuming you’re using the bash shell), restart your shell and execute conda activate ipkiss3 again.

Installing the license on Linux

Upon receiving the software, you will also receive a license key (with the .lic extension). In order for IPKISS to recognize the key, it has to be placed into the folder of your Python environment. For example, when you installed IPKISS to the default location, you need to put the license key into the $HOME/miniconda/envs/ipkiss3 folder.

Alternatively you can install the license by dragging and dropping the license file on the Luceda control center, as explained in the instructions for windows. After activating your ipkiss3 environment, you can launch the control center by invoking the ipkontrol command from the command line.

Please check the where to go next section to find out where the documentation and samples can be found.

Configuring your IDE

When you configure your IDE to work with conda, you’ll need to make sure that the correct python executable is used. The setup is very similar to the setup on windows.

Using a floating license

Hosting the license server

Before being able to use the floating server, your license administrator needs to install the license server. The instructions are found here: setting up the reprise license server.

Configure your floating license

As explained in Installing the license, the floating license also needs to be placed in the Python environment folder. For Windows, it is at C:\luceda\ipkiss_xyz\ for example; for Linux, it is at $HOME/miniconda/envs/ipkiss3.

Additionally, please make sure the location of the license server is set correctly to the URL of the server that hosts the license. To prevent interference with the license server or RLM’s web server, it is recommended to set the ISV server port to something other than 5053 or 5054.

You can find these configuration settings in your ‘.lic’ file under the title “location of the license server”. For example:

# Location of the license server
HOST 1021486dc38f 5053
ISV luceda port=5055

Remember to replace with the server address.

An alternative approach is to set the luceda_LICENSE environment variable. Certainly when you use multiple environments, this can be more convenient than using a file.

For example on windows you can execute the following to set the environment variable.

setx luceda_LICENSE

on Linux you could put the following in your .bashrc file:



We will assist you if you are experiencing difficulties with your license or installation. To help us find the cause, we kindly ask you to download our Diagnostics Tool from

If you don’t have access to the link, please submit a support ticket through

Running diagnostics on Windows

  1. Unzip the file

  2. Run (by double-clicking) luceda_diagnostics_tool_py27.bat or luceda_diagnostics_tool_py38.bat, depending on whether you are using the Python 2 or Python 3 installation of IPKISS.

  3. A zip file named will appear in the same folder.

  4. Please send this zip file to

If you have a Python IDE (i.e. PyCharm), you can also go through the following steps.

  1. Unzip the file

  2. Run (with your Python IDE) in the IPKISS environment.

  3. A zip file named will appear in the same folder.

  4. Please send this zip file to

Windows may warn you when you try to run the .bat file and show you the following message. Just click on [More info] and then on [Run anyway]:


Running diagnostics on Linux

  1. Unzip the file

  2. Run (with your Python IDE, or in terminal) in the IPKISS environment,

  3. A zip file named will appear in the same folder,

  4. Please send this zip file to

While waiting for a response you can have a look at the diagnostics files in the zip file(s) to identify possible issues.


These diagnostics tools gather information about your computer. If you wish to omit certain information before sending it to us, you can easily edit the text files within the zip file(s).

Information we send by default:

  • location of installed IPKISS,

  • list of packages in your IPKISS conda environment,

  • list of available conda environments on your computer,

  • license checkout tests,

  • your computer environment variables.

Installing a GDSII viewer

KLayout is an open source viewer and editor for GDSII and OASIS files. We found it to be an easy-to-use and very accurate tool for viewing GDSII files. It runs on Windows, MacOS and various Linux distributions.

To install KLayout, please go to to download a copy.

Using KLayout, it is possible to open multiple files at once, overlay multiple files on the same screen, do simple edits, perform boolean operations, and so forth.

Design kits may come with a layer properties file .lyp which sets the layer names and drawing colors for easier viewing. This file can be loaded through File ‣ Load Layer Properties.

After installing KLayout, you can open GDS files from your file manager, or directly from within Wing IDE using the Open in External Viewer button as shown in the figure.

Opening a GDS from within Wing IDE.

Open a GDS file from Wing IDE using the Open in External Viewer button.

Where to go next

After installation, the following contents can further help you getting started with IPKISS.

  • samples:

    • Windows: from Luceda Control Center you can access the samples folder (which is available in the %USERPROFILE%\luceda\samples\ipkiss390 directory in your home folder). In this folder there is a Wing project file, which brings you to the Wing IDE editor with the samples inside the project.

    • Linux: after executing setup-samples on the command line, the samples will be available in your home folder in ~/luceda/samples/ipkiss390.

  • documentation:

    • Windows: you can access the documentation by pressing the Luceda documentation button from Luceda Control Center.

    • Linux: To run the documentation, activate the environment and run luceda-doc:

      source activate ipkiss3

      This will start a daemon, hosting the documentation through a web server. It will launch the default browser to show the documentation.

    In the documentation, you can find further links to:

    • Tutorials: the tutorials are a set of step-by-step guides, from beginner to expert IPKISS usage, and covering a wide variety of topics from layout to circuit simulation.

    • Guides: read about advanced guides focused onto several topics of IPKISS (i.e., layout, circuit simulation, netlists, and so on).

    • Logging: read about the different IPKISS logging levels (which are useful to find out which version of IPKISS you are using or to enable several debugging options).

    • Managing virtual environments: use virtual environments when you need additional python packages for advanced development work.

Environment variables used by IPKISS

The following environment variables are used by IPKISS:

  • luceda_LICENSE: Folder to where license files are stored, or See configuring floating license. This variable is case-sensitive on Linux.


  • LUCEDA_LOG_DIR: Directory where log files for IPKISS are stored. When not set, %APPDATA%\luceda\logs (typically C:\users\yourusername\AppData\Roaming\luceda\logs) on Windows or $HOME/.luceda/logs on Linux will be used.

  • LUCEDA_FILE_LOG_LEVEL: Logging level for the file logs. Default is DEBUG. Possible values: ERROR (least details), WARNING, INFO, DEBUG, TRACE (most details).

  • LUCEDA_PYEVAL: Path to the python interpreter which is used to run PCell evaluations from external tools. When using OpenAccess databases (e.g. in L-Edit or oascript), the Luceda OpenAccess PCell evaluator uses this variable to run the PCell evaluation in IPKISS. This variable is set into the user environment variables automatically when installing IPKISS (unless if you deselected the option). Change this value to another pythonw.exe if you want to change which Python interpreter is used.

  • LUCEDA_EVAL_OPTS: This variable is only for use with IPKISS Link for Siemens EDA to set options related to the Luceda evaluator. This is an advanced setting, aimed at users that need the flexibility.

    The variable controls how processes are launched. The value can be either SP or PL (single-process / process-per-library). If no value is provided, the default is to use SP (single-process). The IPKISS < 3.4 behavior is to do a process per library. SP has the advantage to mimic better the default IPKISS behavior where libraries can share cells.